Wicker crafts five knitting techniques detailed

Liubian products are handicrafts widely popular in China. They are "woven baskets and braids, and every family has them." This is because the source of raw materials for this process is very wide. The main raw materials used in the compilation of baskets in the north include willow, tamarix, mulberry, vitex, amorpha, etc., which are produced in saline-alkali land and swampy land.

Flat knitting, twisting, knitting, knitting, and weaving are the five main techniques of the craft.

1. Flat editing techniques. This is the main type of work for weaving sheet mats. It is characterized by latitude and longitude intertwined, interspersed with each other, you can pick a pressure one, you can also pick two pressure two, pick a pressure two, pick two pressure one, so as to form a different pattern of cross weave.苇 苇 席 席 箔 箔 箔 箔 箔 箔 箔 箔 箔 箔 箔 箔 箔 箔. Other high suede weaving, bamboo weaving, and rushing weaving are also based on flat knitting. Wicker weaving with flat knitting is not much.

2. Stranding techniques. Stranded weaving is also a type of work characterized by warp and weft compression. The difference between it and the peace is that in the warp knitting, the flat warp and weft are the same, and at the same time, the action is woven forward; while the weaving is the first to arrange the warp, the warp is the rope, the sliver, the bamboo rod, even It is a wire, and then it crosses up and down through the piles by windings (willows, rakes, and rakes) and circulates around. After weaving, the surface is covered by weft knitting and does not show warp. The twisted sliver requiring weft weaving must be relatively soft and ductile, so it is often used for weeding of Pucao, Xiliu, and mulberry.

3. Edited techniques. Le Bian is a traditional wickerwork type. The utensils made with Le series are generally called "fed." The method uses hemp rope as a warp, wicker as a weft, twine interlaced through the wicker, and once it is worn, it is tightened around the buckle. Usually the folks see the gongs, the buckets, the baskets, the wicker bags and so on. main part. To compile the edges of artifacts, it is often necessary to make additional panels, frames, or frames so that the surrounding area will be neat and not scattered.

4. Masonry techniques. Masonry is one of the common work styles of traditional hand-knitting. The artifacts made with the braiding process are generally referred to as "stuffing." Its method is mostly used for the preparation of circular objects by polymerizing the braids and then wearing them with a firmer cymbal. Commonly used blocks such as rice dumplings, rice cookers, and paper dumplings are made using this method.

5. entanglements. The auxiliary work of articles is indispensable. It is mainly used for edge and handle parts of articles. Its method uses hard materials as the core. On the outside of the core, it is wrapped in a certain direction with soft slivers (vine skin, plastic tape, suede, etc.), and it is fixed on the one hand, on the other hand, it has a surface decoration effect. Wrapped edges can be used in single or multiple strips, and the individual strips are neatly arranged. The effect is simple and generous. Multiple pieces of materials can be used in various colors. Can be seen in the wax rod furniture, willow products and screens such as the edge and the Department of convergence.